PDA

View Full Version : TA05 pulleys + new bellcrank on msx

Dan
21st February 2006, 05:24 PM
Have you lads seen this?

Maezumi's car with TA05 pulleys and a new steering bellcrank system

http://www.rctech.net/forum/attachment.php?attachmentid=120436
scotty
22nd February 2006, 06:28 AM
Dan these pulleys are what Spashett was running at DMS.He seemed to like them but when asked if Rheinard would run them, he said no as Rheinard didn't think there was any performance advantage but got to say the new white pulleys look cool.
Malcolm Williams
22nd February 2006, 07:54 AM
Scott when is he going to use the new TA05 style Blue belts to complete the blue theme with the rest of the TRF blue?
Malky
Dan
22nd February 2006, 10:16 AM
It says on rctech that all the TRF boys at the TITC ran the pulleys including Marc as it is meant to make the transmission smoother or something?

D
big si
22nd February 2006, 04:04 PM
the ta05 pullys have one more tooth than the 415 ones though which would totaly change the ratios.

the top deck is different too
scotty
23rd February 2006, 11:15 PM
Si i've been on www.rctech.net and looked at all the pics of the TRF 's and all the top decks are the same as ours.If you go into the forums on rctech.net and go to T.I.T.C. you'll see all of them.Also all the Cyclones seem to be running MSX diffs.
big si
24th February 2006, 12:36 AM
the topdeck is totaly different have a look at these pics from the same forum

something else i noticed is look at the mounting points from the topdeck to lower chassis our chassis dont have a hole at that point so to run that topdeck and bellcrank you would require a new lower deck.
big si
24th February 2006, 12:51 AM
look what else i have just found


is this yet another new tamiya?????????
Dan
24th February 2006, 08:04 AM
Is that not the SpeedtechRC project XR-05? which is upgrading the TA-05 with aftermarket bits? It looks similar......see below:

http://www.speedtechrc.com/store/ebpage.asp?page=XR05

Looks smart eh?

D ;)
Malcolm Williams
24th February 2006, 08:56 AM
You beat me to it Dan nice one
Malky
big si
24th February 2006, 04:22 PM
i stand corrected :)

its stunning a great looking piece of kit
big si
8th March 2006, 06:57 PM
new bellcrank is coming for the msx follow the link

http://www.rczone.net/modules.php?name=News&file=article&sid=730
ballsie
8th March 2006, 10:33 PM
fitting the TA05 pulley on the 415 one-way is not a problem, until you try to put it in the car!

The new pulley is marginally wider than the 415 one, so you either need to take a little off somewhere or loosen the bulkheads before fitting.

I'll have a go and report back.