PDA

View Full Version : New Novak 13.5 Stock Equivalent


Garrypd160
12th September 2006, 09:52 AM
Will Falkirk club be allowing the use of the new Novak 13.5 Brushless stock equivalent motor?

ballsie
12th September 2006, 07:09 PM
Officially, I'd imagine if it's BRCA legal then there's no issue.

Might have to take a decision on it if it's not - any idea on price?

bigchris
12th September 2006, 08:08 PM
normal brushless kit price , but it is comparable ferformance from what i have seen, shouldnt be a problem as steven cresswell was using a 4,5 brushless last ime i was thee and its equivelant to a 7 turn , but he did have the high point turned down to approx 30%

ballsie
12th September 2006, 10:37 PM
normal brushless kit price

That concerns me a bit to be honest. Having said that; what maintenance do you have to do on a brushless system?

HPI Pro4
12th September 2006, 11:57 PM
How much is a brushless system? Is everyone still running 19t on carpet?

Colin Barclay
13th September 2006, 12:05 AM
I read somehwere that brushless motors need the bearings cleaned after around 5000 hours of running.

ballsie
13th September 2006, 08:45 AM
I read somehwere that brushless motors need the bearings cleaned after around 5000 hours of running.

That's pretty impressive!

Garrypd160
13th September 2006, 08:48 AM
I took mine apart after monday night to have a look at it. The only maintenance you could possibly do is replace the bearings.

The front bearing, which takes most of the effort is considerably larger than a normal bearing.

I am coming up on Friday and would be keen to run it, if no-one minds.

I know you will all be running 19t so I cant see too many people complaining.

Malcolm Williams
13th September 2006, 09:46 AM
How much is a brushless system? Is everyone still running 19t on carpet?

novaks are around the £200 mark including the gtb esc from my last gander at them

ballsie
13th September 2006, 09:46 AM
I don't think anyone would have a problem with that Gary, after all as you said, we'll all be running 19t anyway.

If you don't mind me asking - how much did it set you back?

Cheers,

Alan

Garrypd160
13th September 2006, 10:00 AM
£160 for a Novax GTB, a 13.5 motor and a 6.5 motor.

Tower Hobbies were doing a deal on them at the time. I got stung £30 for import tax. But still a pretty good deal in my opinion.

The one thing I would say to anyone looking to get one, I have a sphere comp as well as the Novak and the LRP/Nosram is an easier speedo to use.

All the speedos run brushed motors too, so its not as big an expense as people make out.

ballsie
13th September 2006, 10:52 AM
Thanks Garry,

Is the 6.5 an Equivalent to a 19 turn?

Do LRP make an equivalent to the stock or 19 turn?

Garrypd160
13th September 2006, 11:08 AM
6.5 is more like an 11 turn.

LRP dont make one yet, but I cant see it being far off

bigchris
13th September 2006, 11:45 AM
from what i know

6.5= 11 turn brushed
5.5= 9 brushed
4.5= 7 brushed
3.5 ???

Garrypd160
13th September 2006, 11:50 AM
from what i know

6.5= 11 turn brushed
5.5= 9 brushed
4.5= 7 brushed
3.5 = FQ (as in the Mitsubishi definition)

:mrgreen:

ballsie
13th September 2006, 12:18 PM
Like it :D